Account Logout

You have been logged off your account. It is now safe to leave the computer.

Your shopping cart has been saved, the items inside it will be restored whenever you log back into your account.

Shopping Cart
8x8 Cat 5 VGA/Audio Matrix Switch - VM0808T

8x8 Cat 5 VGA/Audio Matrix Switch - VM0808T

The ATEN VM0808T 8x8 Cat 5 A/V Matrix Switch is a versatile audio/video over Cat 5 + serial solution that offers an easy and affordable way to route any of 8 audio/video sources to any of 8 displays, in combination with the ATEN VE500 A/V Over Cat 5 Extender system.

With eight Cat 5 A/V input ports, the VM0808T allows you to connect eight source devices (via eight VE500T transmitters) to eight monitors, displays, or projectors (via eight VE500R / VE500RQ receivers) at the same time. In addition to the eight Cat 5 connections, the unit is also enabled with local audio/video inputs/outputs so that an extra source device and monitor located in the same rack as the VM0808T can function as a further transmitter and receiver.

Compatible Receiver Units:
ATEN VE500T A/V Over Cat 5 Transmitter
ATEN VE500R A/V Over Cat 5 Receiver
ATEN VE500RQ A/V Over Cat 5 Receiver with Deskew

 

PACKAGE CONTENTS

  • 1x VM0808T 8x8 Cat 5 A/V Matrix Switch
  • 1x Power Cord
  • 1x Rack Mount Kit
  • 1x Grounding Wire
  • 3x Terminal Blocks
  • 1x User Manual
  • 1x Quick Start Guide

 

FEATURES

  • Connects any of 8 Cat 5 A/V inputs to any of 8 Cat 5 A/V outputs in combination with ATEN VE500 A/V Over Cat 5 Extender system
  • Long signal range – supports up to 1000ft between VE500T transmitters and VE500R / VE500RQ receivers
  • Easily switch between multiple sources and multiple displays
  • Local Operation:
    •  Front panel LCD display and pushbuttons:
    •  Serial controller
  • Remote Operation:
    •  Browser-based Graphical User Interface (GUI)
    •  Telnet
  • Supports additional local input and local display – provides an extra input / output source
  • Supports Video Quality – up to 1920 x 1200@60Hz; DDC2B
  • Supports stereo and balanced audio
  • Automatic and adjustable video and audio quality
  • Independent switching of audio and video sources – any audio source can be connected to any video source for output flexibility
  • Firmware upgradeable
  • Rack Mountable

    * Note: The VM0808T AP and GUI operation instructions can be downloaded from the ATEN website (www.aten.com)

 

DIAGRAM

 

SPECIFICATIONS

Video Input
Interfaces 8 x RJ-45 Female
Impedance 100 Ω
Video Output
Interfaces 8 x RJ-45 Female
Impedance 100 Ω
Video
Max. Bandwidth 500 MHz
Max. Resolution Up to 1920 x 1200 (Depends on connected receiver)
Max. Distance Up to 300 m (Depends on connected receiver)
*The maximum transmission distance between the transmitter and the receiver is 300 m.
Audio
Input Balanced: 1 x Captive Screw Connector, 5 Pole
Stereo: 1 x Mini Stereo Jack Female (Green)
Output Balanced: 1 x Captive Screw Connector, 5 Pole
Stereo: 1 x Mini Stereo Jack Female (Green)
Control
RS-232 Connector:1 x DB-9 Female (Black); 1 x DB-9 Male (Black)
Serial Control Pin Configurations:
Male: Pin2 = Rx, Pin 3 = Tx, Pin 5 = Gnd
Female: Pin2 = Tx, Pin 3 = Rx, Pin 5 = Gnd
Baud rate and protocol:
Baud Rate: 19200, Data Bits: 8, Stop Bits: 1, Parity: No, Flow Control: No
RS-485/RS-422 Connector: 1 x Captive Screw Connector, 5 Pole
Ethernet 1 x RJ-45 Female
Connectors
Power 1 x 3-prong AC socket
Power
Maximum Input Power Rating 100-240 VAC~:50-60 Hz; 1.0A
Power Consumption AC110V:14.4W:68BTU
AC220V:15.4W:68BTU
Environmental
Operating Temperature 0-50°C
Storage Temperature -20 - 60°C
Humidity 0 - 80% RH, Non-Condensing
Physical Properties
Housing Metal
Weight 3.50 kg ( 7.71 lb )
Dimensions (L x W x H) 43.24 x 26.30 x 4.40 cm
(17.02 x 10.35 x 1.73 in.)
Carton Lot 1 pc
Note For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.

$ 980.00

$ 479.00